From: vicarsb@xxxxxxxxxxxxxx
Date: Wed Aug 29 2001 - 16:48:30 GMT-3
Depending upon the LMI type used, the show frame relay map command will show
the cir (BW =)
router#sh frame-relay map
Serial1/0.202 (up): point-to-point dlci, dlci 202(0xCA,0x30A0), broadcast,
BW = 256000
status defined, active
Serial1/0.167 (down): point-to-point dlci, dlci 167(0xA7,0x2870), broadcast,
BW = 48000
LMI of Cisco will show CIR info. LMI of ANSI will not. This the the LMI
type that the carriers send out. Changing the LMI on the router will not
change what the carrier sends.
-----Original Message-----
From: Rajeev Siddappa [mailto:raj_lab@yahoo.com]
Sent: Wednesday, August 29, 2001 10:05 AM
To: ccielab@groupstudy.com
Subject: What CIR does my service provider is giving.
Hi
Is ther any tool in the Cisco router or any software
which can help me to find
1. What is the CIR provide by my service provider.
Thank you,
Rajeev.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:00 GMT-3