RE: DLSW: SAP lists

From: David Ham (David.Ham@xxxxxxxxxx)
Date: Mon Aug 27 2001 - 21:57:11 GMT-3

• Next message: Kevin Williams: "OSPF over Frame Relay non -broadcast networks using neighbor command."
• Previous message: Scott: "Lab Swap - 10/3/01 in SJ"
• Maybe in reply to: Devender Singh: "DLSW: SAP lists"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I agree.

Davender,
Is there any reason put SSAP Mask to 0x0D?

Regards
David

-----Original Message-----
From: Atakan San [mailto:asan@cisco.com]
Sent: Sunday, 26 August 2001 10:11
To: Devender Singh (CMC)
Cc: Ccielab@Groupstudy. Com (E-mail)
Subject: Re: DLSW: SAP lists

Hi Dev,

Your solution denies not only 12 but also 13

Please have a look here: http://www.cisco.com/warp/public/698/acl200.html

Cheers
Atakan

Devender Singh wrote:

> I have two routers R1 and R2.
>
> Topology:( ring - r1-r2-ring)
>
> O----- R1 --------R2 ----O
>
> R1 and R2 are configured as dlsw peers.
>
> Task: configure R1 to block users from accessing SAP with a value of 012.
>
> My solution to this is:
>
> !
> interface TokenRing0
> source-bridge input-lsap-list 200
> !
> access-list 200 deny 0x0C00 0x010D
> !
>
> Question: Do you agree with me, and why.
>
> rgds
>
> Devender Singh
> BE(Hons), CCNP
> IP Solution Specialist
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Kevin Williams: "OSPF over Frame Relay non -broadcast networks using neighbor command."
• Previous message: Scott: "Lab Swap - 10/3/01 in SJ"
• Maybe in reply to: Devender Singh: "DLSW: SAP lists"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3