From: Sakir Balikcioglu (sbalikcioglu@xxxxxxxxxx)
Date: Sun Aug 26 2001 - 15:46:11 GMT-3
Steve,
check this URL out. It helped me a lot, I hope it helps you too.
http://www.cisco.com/warp/public/698/acl200.html
Chuck.
At 12:52 AM 8/26/01 -0400, Steven Weber wrote:
>while we're on this topic does anybody know where I can find a good tutorial
>on this stuff
>Thanks
>Steve
>----- Original Message -----
>From: Fred Ingham <fningham@worldnet.att.net>
>To: Devender Singh <devender.singh@cmc.cwo.net.au>
>Cc: Ccielab@Groupstudy. Com (E-mail) <ccielab@groupstudy.com>
>Sent: Saturday, August 25, 2001 5:10 PM
>Subject: Re: DLSW: SAP lists
>
>
> > Devender: Access-list is ok for a destination SAP of 0C and any SNA
> > source SAP. But as written it denies all SAPs. A access-list 200
> > permit 00 00 ff ff statement after the deny would allow other SAPs. If
> > the users are on R1 token 0, I would use an output-lsap-list rather than
> > an input-lsap-list.
> >
> > BTW SAP 0x0C is the default local SAP for DSPU hosts.
> >
> > Cheers, Fred.
> >
> > Devender Singh wrote:
> > >
> > > I have two routers R1 and R2.
> > >
> > > Topology:( ring - r1-r2-ring)
> > >
> > > O----- R1 --------R2 ----O
> > >
> > > R1 and R2 are configured as dlsw peers.
> > >
> > > Task: configure R1 to block users from accessing SAP with a value of
>012.
> > >
> > > My solution to this is:
> > >
> > > !
> > > interface TokenRing0
> > > source-bridge input-lsap-list 200
> > > !
> > > access-list 200 deny 0x0C00 0x010D
> > > !
> > >
> > > Question: Do you agree with me, and why.
> > >
> > > rgds
> > >
> > > Devender Singh
> > > BE(Hons), CCNP
> > > IP Solution Specialist
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
Regards,
(Chuck) Balikcioglu, Sakir
Network Systems Consultant
CCNP+ATM, MCSE
Lucent Networkcare, Falls Church Office
Phone: 703 226 4606
Pager:1800 884 9954
Email: sbalikcioglu@lucent.com
Epage: page_chuck_balik@ins.com
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3