From: Raphael Gallegos (raphaeljg@xxxxxxxxxxx)
Date: Sat Aug 25 2001 - 19:04:54 GMT-3
Food for thought:
Same procedure relatively (copy to slot0:) but you need to also pay
attention to the DRAM specs besides the pcmcia flash, especially going from
11 to 12 IOS. I don't think that the 7500 series router has onboard regular
flash, but it does have onboard simm flash which stores the bootflash boot
image (This is your last resort IOS and it also updates device drivers upon
initial boot up like a .inf file in windows...You can try the other RSP 7000
card but it may or may not work, dependent on what you have in your current
7500 and the order/amount of high/medium/low bandwidth adapters, etc, most
likely it will not work.
Raphael
>From: "Muhammed Omar" <muhammed_omar@hotmail.com>
>Reply-To: "Muhammed Omar" <muhammed_omar@hotmail.com>
>To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
>Subject: 7500 Router Issues
>Date: Sat, 25 Aug 2001 10:21:04 +0100
>
>I'm trying to upgrade IOS (ver 11 to 12) on a 7500 router which has 8Mb
>flash
>onboard & 8Mb flash as PCMCIA card to run ATM for CCIE Lab. I don't have
>the
>exact error message with me. Can anyone please tell me if the procedure is
>any
>different than upgrading other small routers.
>
>Also I've a 2nd 7500 chaise ONLY. Can I use a route processor from a 7000
>router in this 7500?
>
>Thanks
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3