From: SALMON, MARK (SBMS) (MARK.SALMON@xxxxxxxxxxxx)
Date: Tue Aug 21 2001 - 14:50:31 GMT-3
Not supported on dialer interfaces, dialer string is the replacement.
Mark Salmon
Sr. WAN Engineer Great Lakes Region
Cingular Wireless
2000 Ameritech Center Drive 3F07B
Hoffman Estates IL 60195
Voice: (847)765-3999
Pager: (847)992-0458
Email: mark.salmon@cingular.com
-----Original Message-----
From: Don Dettmore [mailto:don@donshouse.com]
Sent: Tuesday, August 21, 2001 11:58 AM
To: SALMON, MARK (SBMS)
Cc: CCIE Lab List
Subject: Re: Snapshot routing on Dialer Interfaces
It's been a while, but I seem to remember needing to have a 'dialer map
snapshot' command to have it initiate dialing.
Don Dettmore
----- Original Message -----
From: "SALMON, MARK (SBMS)" <MARK.SALMON@cingular.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, August 21, 2001 12:12 PM
Subject: Snapshot routing on Dialer Interfaces
> Has anyone ever configured and successfully tested snapshot routing on
> dialer interfaces? Here is my config. Mine will not initiate the call at
> all.
>
>
> interface Dialer1
> ip address 172.30.232.3 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> ip ospf network point-to-point
> dialer remote-name r5
> dialer pool 1
> dialer idle-timeout 180
> dialer string 8358662 class dial1
> dialer load-threshold 64 outbound
> dialer-group 1
> ipx network 33335555
> snapshot client 5 8 dialer
> ppp callback accept
> ppp authentication chap
> end
>
> dialer-list 1 protocol ip list 199
> dialer-list 1 protocol ipx permit
>
> Mark Salmon
> Sr. WAN Engineer Great Lakes Region
> Cingular Wireless
> 2000 Ameritech Center Drive 3F07B
> Hoffman Estates IL 60195
> Voice: (847)765-3999
> Pager: (847)992-0458
> Email: mark.salmon@cingular.com
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3