From: SALMON, MARK (SBMS) (MARK.SALMON@xxxxxxxxxxxx)
Date: Tue Aug 21 2001 - 14:49:51 GMT-3
Comments in line
Mark Salmon
Sr. WAN Engineer Great Lakes Region
Cingular Wireless
2000 Ameritech Center Drive 3F07B
Hoffman Estates IL 60195
Voice: (847)765-3999
Pager: (847)992-0458
Email: mark.salmon@cingular.com
-----Original Message-----
From: Chuck Sakir Balikcioglu [mailto:sbalikcioglu@lucent.com]
Sent: Tuesday, August 21, 2001 11:37 AM
To: SALMON, MARK (SBMS); 'ccielab@groupstudy.com'
Subject: Re: Snapshot routing on Dialer Interfaces
At the first scan I can see that the client configured as ppp callback
accept (server should have this). The client should be the requester.
Based on the fact that I have dialer maps on both sides, it is irrelevant
which side is client or server as far as callback is concerned. PPP
callback is only there so one side can "save" on expenses.
Also
the load-threshold, I did not get the point of this, I think there are some
Also irrelevant to the issue, dialer-load is only to allow additional
channels (it works) to be brought up if the load requires it.
loose ends to combine this command to. If the condition matches what would
you like the action to be? May be missing multilink command? What is the
access list 199? Where is the dial1 map-class?
Just my 2 cents.
I did show all the information in access list 199. It is to prevent OSPF
multicasts from bringing up the line. It is also irrelevant to IPX.
Chuck.
At 11:12 AM 8/21/01 -0500, SALMON, MARK (SBMS) wrote:
>Has anyone ever configured and successfully tested snapshot routing on
>dialer interfaces? Here is my config. Mine will not initiate the call at
>all.
>
>
>interface Dialer1
> ip address 172.30.232.3 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> ip ospf network point-to-point
> dialer remote-name r5
> dialer pool 1
> dialer idle-timeout 180
> dialer string 8358662 class dial1
> dialer load-threshold 64 outbound
> dialer-group 1
> ipx network 33335555
> snapshot client 5 8 dialer
> ppp callback accept
> ppp authentication chap
>end
>
>dialer-list 1 protocol ip list 199
>dialer-list 1 protocol ipx permit
>
>Mark Salmon
>Sr. WAN Engineer Great Lakes Region
>Cingular Wireless
>2000 Ameritech Center Drive 3F07B
>Hoffman Estates IL 60195
>Voice: (847)765-3999
>Pager: (847)992-0458
>Email: mark.salmon@cingular.com
>**Please read:http://www.groupstudy.com/list/posting.html
Regards,
(Chuck) Balikcioglu, Sakir
Network Systems Consultant
CCNP+ATM, MCSE
Lucent Networkcare, Falls Church Office
Phone: 703 226 4606
Pager:1800 884 9954
Email: sbalikcioglu@lucent.com
Epage: page_chuck_balik@ins.com
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3