From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Tue Aug 21 2001 - 04:01:58 GMT-3
Erik,
I disagree with this - if you run ISIS over ATM (which is NBMA on the major
interface), then it works OK. I am sure that you need to have a layer 2
mapping to CLNS for this to work.
Cheers,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: ELAW@dr.dk [mailto:ELAW@dr.dk]
Sent: Tuesday, 21 August 2001 17:36
To: yyao@sympatico.ca
Cc: ccielab@groupstudy.com
Subject: RE: isis over frame relay
> Does anyone know how to configure ISIS over frame relay?
>
> R2/s0----------s0/R1/s0------------s0.1/R3
>
> R1 is the hub, it use int s0 (2 DLCI) to connect with R2
and R3.
>
> I have router isis and net xxxxxx configured on all three
routers.
> I also have all the interfaces configured with ip router
isis.
>
> When I do show clns is-neighbors, I can not find neighbors
at all.
IS-IS doesn't work over NBMA.
You need p2p subinterfaces or a full mesh over Frame Relay.
Same goes for NLSP.
--Erik
**Please read:http://www.groupstudy.com/list/posting.html
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3