Re: IPX SAP filters and NLSP

From: Taz Kazam (taz_kazam@xxxxxxxxxxx)
Date: Mon Aug 20 2001 - 06:41:59 GMT-3


   
Jason,

I think I know what the problem might be. NLSP has its
own subset of RIP and SAP broadcasts, which need to be
switched off.

Under the interface where NLSP is running you need to
do the following commands:

 ipx nlsp rip off
 ipx nlsp sap off

I hope this helps!

Kind Regards
Taz.

 --- Jason Sinclair <sinclairj@powertel.com.au> wrote:
> I have set up a simple two node lab with a 2 static
> SAP's on router1
> advertised to router2. When I use RIP to advertise
> the SAP's, and configure
> an inpuut-sap-filter on router2 to block one of the
> services it works fine.
> However when I use NLSP and stop RIP, the server
> re-appears under show ipx
> servers. (eg they are both back there). Am I missing
> something in NLSP.
>
> Regards,
>
> Jason Sinclair
> Team Leader - NSG
> POWERTEL Limited
> Level 11, 55 Clarence Street, SYDNEY
> Phone: 61-2-8264-3820
> Mobile: 0416 105 858
> jasons@powertel.net.au
>
>
>
>
>
**********************************************************************
> This email (including all attachments) is intended
> solely for the named
> addressee. It is confidential and may contain
> commercially sensitive
> information. If you receive it in error, please let
> us know by reply email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of
> it should be reproduced,
> adapted or transmitted without the prior written
> consent of the copyright owner.
>
> Emails may be interfered with, may contain computer
> viruses or other defects
> and may not be successfully replicated on other
> systems. We give no
> warranties in relation to these matters. If you have
> any doubts about
> the authenticity of an email purportedly sent by us,
> please contact us
> immediately.
>
>
**********************************************************************
> **Please
> read:http://www.groupstudy.com/list/posting.html
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:54 GMT-3