From: Hans (yyao@xxxxxxxxxxxx)
Date: Fri Aug 17 2001 - 11:21:48 GMT-3
Hi all,
R2/s0--pvc--s0/R1/s1--pvc-s0/R3
R1 is the hub router with 2 pvcs, R2 and R3 are spokes with only one pvc each.
All the routers use physical interface. I have also configured frame relay map
with the broadcast key word on both R2 and R3 so that they can ping each other.
Then I enable ospf and put ip ospf network point-to-multipoint on all the seria
l interfaces of the three routers. I have loopbacks(/24) configured on all the
three routers and include them in ospf and I also put ip ospf network point-to-
point under all the loopbacks, I know otherwise the loopback will appear to be
/32.
Then I show ip route on R3, everything works perfect except I saw two /32 ospf
learnt route of R2's s0 and R1's0.
The second weird thing is, when I try to use distribute-list to filter the two
/32 routes on R3, to prevent them from going into the routing table of R3, on t
he inbound interface of s0 of R3, I can not not remove them. (I know it is impo
ssible to remove any ospf routes from the ospf database, but what I am trying t
o do is just to prevent them from coming into the routing table). I still can s
ee the two /32 routes in R3's routing table.
Need your help on that.
Hans
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:52 GMT-3