From: LRLAB (lrlab@xxxxxxxxxx)
Date: Thu Aug 16 2001 - 15:06:07 GMT-3
We had a similar problem eith our CS508 found that the published
recovery/reset to default did not work if we had anything plugged into ports
2-8. Plug a serial console into port 1 and do the reset. Worked for me.
-----Original Message-----
From: Brad Steinman <steinman@speakeasy.net>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Cc: Paul <stlpaul.wood@mistral.co.uk>; klean@mindspring.com
<klean@mindspring.com>
Date: Wednesday, August 15, 2001 9:25 PM
Subject: Re: RE:Termial Server CS-516 password Recovery?
>This procedure worked for me EXCEPT
>
>"When the OK and LAN LEDs blink off (after about 15 seconds), release the
>DEFAULT button. "
>
>I found that a BRIEF (one sec push and release) button push worked for me.
>The 'hold down the DEFAULT button for approximately 15 seconds' method
>didn't work on my 516. This came after an hour or so of frustration,
>including a TAC case. However, your mileage may vary. :)
>
>Maybe this is a difference in Bootstrap Code levels? I'm curious as to
which
>method works for you. Here's my 516's 'stats' for the record:
>
>BRAD#sh hard
>CS Software (CS500-K), INTERIM SOFTWARE Version 9.1A(0.2)
>Copyright (c) 1986-1992 by cisco Systems, Inc.
>Compiled Thu 04-Jun-92 18:43
>
>System Bootstrap, Version 4.4A(0.2), INTERIM SOFTWARE
>
>BRAD uptime is 6 days, 1 hour, 8 minutes
>System restarted by reload
>Running default software
>
>Cisco-500 (68331) processor with 10240K bytes of memory.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>1 Ethernet/IEEE 802.3 interface.
>16 terminal lines.
>32K bytes of non-volatile configuration memory.
>Configuration register is 0x101
>
>
>
>-Brad
>
>
>----- Original Message -----
>From: "Paul" <stlpaul.wood@mistral.co.uk>
>To: <ccielab@groupstudy.com>
>Cc: "Kenneth Leon" <klean@mindspring.com>
>Sent: Wednesday, August 15, 2001 5:54 PM
>Subject: Re: RE:Termial Server CS-516 password Recovery?
>
>
>> HTH
>>
>> http://www.cisco.com/warp/public/474/pswdrec_cs500.html
>> ----- Original Message -----
>> From: Kenneth Leon
>> To: ccielab@groupstudy.com
>> Sent: Wednesday, August 15, 2001 10:19 PM
>> Subject: RE:Termial Server CS-516 password Recovery?
>>
>>
>> Hello,
>>
>> Anybody familiar with the password recovery procedure on the CS-516
>> terminal Server.
>>
>> I am trying to get into the enable (priveliged mode) but cannot not
>> familiar with pass. recovery on this one.
>>
>> The diaplay for sh version is:
>> ===============================
>> tu-cs1>sh ver
>> CS Software (CS500-KR), Version 9.21(7), RELEASE SOFTWARE
>> Copyright (c) 1986-1994 by cisco Systems, Inc.
>> Compiled Wed 11-Jan-95 13:30 by deannaw
>>
>> ROM: System Bootstrap, Version 4.7(7), RELEASE SOFTWARE
>>
>> tu-cs1 uptime is 4 minutes
>> System restarted by power-on
>> Running default software
>>
>> Cisco-CS500 (68331) processor with 2048K bytes of memory.
>> SuperLAT software (copyright 1990 by Meridian Technology Corp).
>> 1 Ethernet/IEEE 802.3 interface.
>> 16 terminal lines.
>> 32K bytes of non-volatile configuration memory.
>> Configuration register is 0x101
>>
>> ========
>>
>> Thank you.
>>
>> Best Regards,
>>
>> Kenneth Leon
>> **Please read:http://www.groupstudy.com/list/posting.html
>> **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:51 GMT-3