From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Tue Aug 14 2001 - 19:18:25 GMT-3
The bandwidth statement DOES affect the load output.
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: Rick Foltz [mailto:ccie2b@rfoltz.com]
Sent: Wednesday, 15 August 2001 01:12
To: ccielab@groupstudy.com
Subject: FW: bandwidth command
ok, now i have been told that the bandwidth command does not
affect what the
load counter shows on the interface, i.e. 1/255 or whatever.
after some
studying today on mmy lab, i think i have determined
otherwise. any
comments?
Richard Foltz, CCNP-Voice, CCDP, MCSE+I, Network+, A+
Project Team Leader, Network Services
Smith Datacom
713-430-2184
3rd Attempt in RTP 11/2 and/or 3rd (CCIE with a * I Guess)
**Please read:http://www.groupstudy.com/list/posting.html
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:51 GMT-3