From: Brian Lodwick (xpranax@xxxxxxxxxxx)
Date: Tue Aug 14 2001 - 13:01:19 GMT-3
It's kindof wierd, read through this config and my notes and see if it
helps?
R1(config-router)# router rip
R1(config-router)# distance 130 ~says set all RIP routes dist. 130
R1(config-router)# distance 100 10.21.1.2 0.0.0.0 2 ~ says when you receive
routes for networks specified in access-list 2 from neighbor 10.21.1.2 set
the administrative distance to 100
Hope that helps.
>>>Brian
>From: "Ravi" <s_ravichandran@hotmail.com>
>Reply-To: "Ravi" <s_ravichandran@hotmail.com>
>To: <ccielab@groupstudy.com>
>Subject: Distance command in EIGRP
>Date: Wed, 22 Aug 2001 11:50:42 -0400
>
>Hi,
>
>I was trying to use distance command in EIGRP no success. I want to change
>the distance of one network only. I could change the distance for all the
>internal and external routes.
>
>distance eigrp 90 100 ---- works (all internal routes 90 and all
>external routes 100)
>
>distance 100 ?
>it gives source ip add and mask, and allows to specify access list.
>
>I could not make this thing to work, I may be doing some thing wrong.
>
>Regards,
>Ravi
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3