From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Sun Aug 12 2001 - 21:42:48 GMT-3
JASON: DEFAULT-INFORMATION ORIGINATE UNDER ROUTER A RIP.
HTH, FRED.
Jason Sinclair wrote:
>
> If you have the following setup:
>
> Loopback(10.0.2.1/24)routerA(10.0.0.1/30)-------------------(10.0.0.2/30)rou
> terB
>
> As we all know running RIPv1 between the two you cannot ping 10.0.2.1 from
> routerB('cause the mask is longer). What would be the correct solution to
> make this happen? I have a couple:
>
> 1. Put a static route 10.0.2.0 255.255.255.0 10.0.0.1 (on routerA)
> 2. Put a static route 10.0.2.0 255.255.255.252 loopback 0 and redistribute
> connected on routerB. This will add the 10.0.2.0 route to routerA routing
> table via RIP.
>
> Note however that if you do step 2 above but route via null0, this will not
> work as the more specific route (10.0.2.0/30) over-rides the /24 and the
> packets are discarded. Anyone know other ways to do this?
>
> Regards.
>
> Jason Sinclair
> Team Leader - NSG
> POWERTEL Limited
> Level 11, 55 Clarence Street, SYDNEY
> Phone: 61-2-8264-3820
> Mobile: 0416 105 858
> jasons@powertel.net.au
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be reproduced,
> adapted or transmitted without the prior written consent of the copyright own
er.
>
> Emails may be interfered with, may contain computer viruses or other defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3