From: Jay Chandradas (jachandr@xxxxxxxxx)
Date: Tue Aug 14 2001 - 00:42:34 GMT-3
Hi sanjay,
Did you have sync turned off at R3 and R2 ? I mean " no sync ". I think
your BGP is waiting to get it sync'ed .
Let me know if this helped..
Jay.
At 07:05 PM 8/13/2001 -0700, sanjay wrote:
>I have 3 routers in a hub & spoke configuration across a frame cloud. R1 has 2
>sub-interfaces. One goes to R2 and the other to R3. Between (subinterface
>1)R1---R2, I have OSPF running and between (subinterface 2) R1--R3, I have
>IGRP running. OSPF and IGRP are configured with a /24 mask and so
>redistribution is working fine. From R3, I have a serial connection to a BGP
>net. On R2, I have setup IBGP connection to R3.
>I can see all routes from the BGP net in the routing table of R2, but when I
>try to ping the BGP Net, it doesn't work. Doing a trace, I find that the
>packet gets dropped at R1 (subinterface that belongs to OSPF). I have neighbor
>x.x.x.x route-reflector-client configured on both routers.
>
>Is the above possible to get to work. ?? I can ping from R2 to R3, but not
>from R2 to the BGP net. Any info is appreciated.
>
>thanks,
>Sanjay
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3