From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Mon Aug 13 2001 - 23:05:37 GMT-3
I have 3 routers in a hub & spoke configuration across a frame cloud. R1 has 2
sub-interfaces. One goes to R2 and the other to R3. Between (subinterface
1)R1---R2, I have OSPF running and between (subinterface 2) R1--R3, I have
IGRP running. OSPF and IGRP are configured with a /24 mask and so
redistribution is working fine. From R3, I have a serial connection to a BGP
net. On R2, I have setup IBGP connection to R3.
I can see all routes from the BGP net in the routing table of R2, but when I
try to ping the BGP Net, it doesn't work. Doing a trace, I find that the
packet gets dropped at R1 (subinterface that belongs to OSPF). I have neighbor
x.x.x.x route-reflector-client configured on both routers.
Is the above possible to get to work. ?? I can ping from R2 to R3, but not
from R2 to the BGP net. Any info is appreciated.
thanks,
Sanjay
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3