Re: mc3810 partnos -> rom versn

From: Jay Hennigan (jay@xxxxxxxx)
Date: Mon Aug 13 2001 - 02:39:03 GMT-3

• Next message: Luke: "dmac-output questions - dlsw"
• Previous message: Voytek Mielczarek: "RE: Ospf NBMA strange experience"
• Maybe in reply to: Peter Whittle: "mc3810 partnos -> rom versn"
• Next in thread: Thomas Trygar: "Re: mc3810 partnos -> rom versn"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
On Mon, 13 Aug 2001, Peter Whittle wrote:

> I have a pair of mc3810-v that I would like to use for VoIP lab
> practice. However, it is only fairly recent versions of IOS that
> support VoIP on a 3810. These newer versions require 64 M DRAM.
>
> The hardware documentation says that I need boot-rom part number
> 17-4840-03 or later. Mine are running ROM code version 12.0(1)XA4.
>
> How do I convert between part numbers and ROM code version?

Open the case and read the part number off of the chip. You need
good eyesight or a magnifying glass.

Or, install a 64MB memory module and see if it's recognized as such.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
NetLojix Communications, Inc.  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Luke: "dmac-output questions - dlsw"
• Previous message: Voytek Mielczarek: "RE: Ospf NBMA strange experience"
• Maybe in reply to: Peter Whittle: "mc3810 partnos -> rom versn"
• Next in thread: Thomas Trygar: "Re: mc3810 partnos -> rom versn"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3