From: Jay Hennigan (jay@xxxxxxxx)
Date: Sun Aug 12 2001 - 20:17:23 GMT-3
On Sun, 12 Aug 2001, Kyle Galusha wrote:
> I'm not sure I follow your requirements but I you tried using the following
> neighbor commands:
> ebgp multihop, update source loopback X, and next-hop-self?
You'll need that, but the problem is that the remote loopback specified
by the neighbor statement is not on a directly-connected network. Thus
there is no route to it.
The premise stated no IGP to the remote neighbor and no static routes.
I can think of two possibilities:
Policy routing
A default network to the neighbor link
Another that I haven't tried would be to run the serial link unnumbered
and specify the loopbacks as the anchor interfaces. I haven't played
with unnumbered links in a while, so I'm not sure if this would work.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3