From: Shane Miles (smiles@xxxxxxxxxx)
Date: Sun Aug 12 2001 - 17:51:03 GMT-3
I don't think I made my question clear. Let's say you have:
10.1.1.1-L0-R1(AS1)----192.168.1.0/30----(AS2)R2-L0-172.16.1.1
R1 is in AS1 and has a loopback address of 10.1.1.1. R2 is in AS2
with a loopback address of 172.16.1.1. I want to configure an EBGP peer
betweeen R1 and R2. I know I have to use multihop in this case but my
question is how does R1 know how to reach 172.16.1.1 and how does R2 know
how to reach 10.1.1.1 without using static routes?
-----Original Message-----
From: Shane Miles [mailto:smiles@ftdata.com]
Sent: Sunday, August 12, 2001 1:59 PM
To: 'ccielab@groupstudy.com'
Subject: BGP w/loopbacks no statics
If I want to use loopback addresses in the BGP neighbor commands on
two routers in different ASs and there is no IGP between them how can I tell
the routers how to get to the loopbacks without using static routes?
-- Shane P. Miles **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3