From: Peter Van Oene (pvo@xxxxxxxxxxxx)
Date: Tue Aug 07 2001 - 13:41:48 GMT-3
I'm not sure about the message, but if your receiving type 4's from an NSSA are
a, something is out of wack given types 4/5 are not permited in NSSA areas. Ar
e you sure you have all your routers connected to the area properly configured
as NSSA?
*********** REPLY SEPARATOR ***********
On 8/7/2001 at 5:05 PM JUAN FAURE FERRER wrote:
>Hello!
>
>I'm working in my lab doing a multiprotocol network witth 6 routers and a
>catalyst 5500 switch. There is an ospf over frame relay simulated backbone
>(by means of a frame relay switch) and a NSSA extension of it over
>ethernet, that provides conectivity with an ASBR that also speakes RIP.
>
>The problem is that this router displays in some situations the error:
>%OSPF-4-BADLSATYPE: Invalid lsa: Bad LSA type Type 4, LSID
> 181.1.3.3 from 181.1.3.3, 181.1.4.1, Ethernet0/0 .
>
>I've used the Cisco Error Message Decoder and it says me that it's
>probably due to a memory corruption and I must reset the router y contact
>the TAC. If I reset the router the problem solves for several days (a week
>aprox.) but at last it re-appears.
>
>Anyone know some information about this that can help?
>
>Best Regards
>
>Juan Faure Ferrer
>e-mail: jfaure@ipt.es
>
>Area de Telematica
>Integracisn de Redes y Sistemas
>IPT SOLUZIONA TELECOMUNICACIONES
>c/Jerez, 3 28016 MADRID
>Tfno: 91 579 30 00 Fax: 91 350 72 83
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:46 GMT-3