From: Ravi (s_ravichandran@xxxxxxxxxxx)
Date: Mon Aug 06 2001 - 15:33:21 GMT-3
Hi,
Do you have multiple pvcs configured on the interface? If yes, try to remove
all the pvcs. If any one pvc is up, the interface will be up up.
Regards,
Ravi
----- Original Message -----
From: "Padhu (LFG)" <padhu@steinroe.com>
To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
Sent: Monday, August 06, 2001 2:07 PM
Subject: FREEK - Why doesn't it declare the serial 0 line down with these
settings ?
> I have the below config on all my hub and spoke routers and when i remove
> the pvc on the frame switch going between the hub and spokes, show frame
pvc
> shows deleted however the serial line is still up up everywhere.
> According to the docs it should declare the line down after error
threshold
> has reached. The pvcs were in deleted for about 30 mins still no luck. I
> thought i that was the purpose of Freek. End to end monitor and declare
line
> down if keepalives fail.
>
> Any insights ?
>
> Cheers,Padhu
>
> map-class frame-relay ccie
> frame-relay end-to-end keepalive mode bidirectional
> frame-relay end-to-end keepalive event-window send 10
> frame-relay end-to-end keepalive event-window recv 10
> frame-relay end-to-end keepalive error-threshold send 5
> frame-relay end-to-end keepalive error-threshold recv 5
> frame-relay end-to-end keepalive success-events send 5
> frame-relay end-to-end keepalive success-events recv 5
>
> interface Serial0.2 multipoint
> bandwidth 256
> ip ospf hello-interval 5
> ip ospf priority 255
> frame-relay class ccie
>
> ================================================================
> Padhu
> Phone : 312-368-3239
> Asst Vice President,Technology Development Fax :
> 312-602-4330
> Liberty Funds Group
> Email : padhu@steinroe.com
> 1 South Wacker Drive ,31st Floor URL
> : www.steinroe.com
> Chicago, IL-60606.
> =================================================================
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:46 GMT-3