From: Himawan Nugroho (nhimawan@xxxxxxxxxx)
Date: Sun Aug 05 2001 - 00:41:50 GMT-3
So..
For PVC, if we don't know the number of vpi/vci, we just use pvc discovery
with 0 16, right?
For SVC, just put 0 16 and 0 5 and you're inside the game...
Do we have to use same vpi/vci for both ends?
And (ehm) what is 0 5 used for?
(sorry for this 'ccna-level' question, but if you don't have the equipment
and can't imagine all this stuff only base on your reading, what should you
do?)
Thanks in advance.
Regards,
Himawan Nugroho
Brian <signal@shreve.net>@groupstudy.com on 08/04/2001 11:44:03 PM
Please respond to Brian <signal@shreve.net>
Sent by: nobody@groupstudy.com
To: Michael Locke <mi_locke@yahoo.com>
cc: <ccielab@groupstudy.com>
Subject: Re: ATM PVC config.
On Fri, 3 Aug 2001, Michael Locke wrote:
> Hi all,
>
> Sorry if this is basic, but I don't have access to ATM
> equipment and would like some thoughts on this issue.
>
>
> With LANE out of the lab, it seems as the only two
> options left on the exam for ATM config are PVCs and
> classical IP. I can config. classical IP with no
> problem. My questions are with PVCs.
you could have SVC's as well.........you don't have to have LANE
to have SVC's.
>
> If you are doing PVCs should you configure 0 16 and 0
> 5 pvcs in addition to the PVC for passing data or
> leave them out. I know these are mainly/basically for
> SVCs.
No. If you are doing pvc autodiscoverty, then you will need
0 16, for ilmi. But 0 5 is not needed for pvc's at all.
>
> If you do not want to rely on atm inverse arp then you
> need a map - same as with frame rely. Can someone
> show me an example of a basic atm map. The reason I
> ask this is I can't find one in print, don't have
> practice equipment. Another side to this same
> question is if you are configuring only 1 PVC, then do
> you have to use a map class for is there an
> easier/more basic way to do this.
Brian
>
> thanks,
> michael
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3