From: Michael Locke (mi_locke@xxxxxxxxx)
Date: Sat Aug 04 2001 - 08:07:05 GMT-3
Hi,
This is a sanity check - I can't verify cause I have
no equipment.
You are doing an ISDN config and only one side has a
dialer string - or only one side has a phone number
and is able to dial, then .... you are are supposed to
bring up the 2nd B channel if link utilization reaches
50%.
The question is does the side that does not have the
number in it's dialer map (therefore is unable to
dial) need the dialer threshold statement? or would it
be considered un needed and a reason to deduct points.
thanks all,
michael
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3