From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Fri Aug 03 2001 - 00:13:21 GMT-3
What are the limitations of the practice lab, i.e. must you have the
mroute for 224.8.8.5 on R3 but can't ping 224.8.8.5? Naturally, you could
just use an extended access-list to filter it or use "ip
multicast boundary" on the outbound interface on r3 and in the access-list
for the command have it apply to 224.8.8.5 only.
Brian
On Thu, 2 Aug 2001 Piperw222@aol.com wrote:
> here is the scenario
>
> all connected through frame relay multicast sparse mode with auto rp on r4 -
> r4 is hub -
>
> r4 - join group 224.8.8.4 r6 join group 224.8.8.6, r3 join group 224.8.8.6
>
> r5 - join group 224.8.8.5
>
>
> I would like to make r3 be able to ping all groups except 224.8.8.5
>
> How should this be done....
>
> Thanks,
>
> Lou
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:44 GMT-3