From: Walter Lam (lpwalter@xxxxxxxx)
Date: Wed Aug 01 2001 - 21:46:56 GMT-3
Hi Matt,
I think it should work. The dialer string or dialer map can solve the
mapping problem. But the idle timeout could be a problem here.
Walter
----- Original Message -----
From: "Matt Smith" <matt-n-donna@cablespeed.com>
To: "Walter Lam" <lpwalter@home.com>; <ccielab@groupstudy.com>
Sent: Wednesday, August 01, 2001 8:27 PM
Subject: Re: ISDN encapsulation Failed
> Couldnt you simply configure the dialer list to deny ip any on one side?
> This would prevent the router from being able to initiate a call but would
> allow it to pass traffic once the lie was brought up by the other side???
>
> -Matt Smith
> ----- Original Message -----
> From: "Walter Lam" <lpwalter@home.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, August 01, 2001 7:53 PM
> Subject: Re: ISDN encapsulation Failed
>
>
> > This is a lay 2/3 mapping problem. Suppose the called router should
create
> a
> > dynamic map for the incoming call. For some reasons which I have not yet
> > found, but I guess it is SPID, the dynamic map is not working correctly.
> Do
> > a "sh dial map" at the called router after the ISDN line is up, you
might
> > find something.
> >
> > Walter Lam
> >
> >
> >
> > > -----Original Message-----
> > > From: Roberto Omori [mailto:roberto.omori@bol.com.br]
> > > Sent: Wednesday, August 01, 2001 8:24 PM
> > > To: ccielab@groupstudy.com
> > > Subject: ISDN encapsulation Failed
> > >
> > >
> > > Hi all,
> > >
> > > To allow only one side to make the call the basic idea is omit the
dial
> > > string
> > > isnt it? Well, I have experienced the following problem:
> > >
> > > 1-If I config. the strings on both sides I can ping both routers.
> > >
> > > 2-If I config. only one side, it dials, the connection is established
> but
> > I
> > > cannot ping the remote router.
> > >
> > > Debugging ip packets, it presents an "encapsulation failed" message.
> > >
> > > Has anyone experienced this problem?
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:43 GMT-3