From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Sun Jul 01 2001 - 23:17:52 GMT-3
rule number one - do what the lab book tells you to do. If the lab scenario
instructs you to use no loopbacks, then you do something else. if the lab
book instructs you to use a particular addressing scheme for your loopbacks,
then follow instructions.
rule number two - if the lab book does not give a specific instruction in
this regard, have a couple of alternative schemes in mind, and ask the
proctor if you can use one of the other.
In my ( somewhat limited ) lab experience, the scenario was pretty straight
forward and pretty detailed.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Steve Barone
Sent: Sunday, July 01, 2001 8:55 AM
To: ccielab@groupstudy.com
Subject: Lab Strategy - OSPF Router-ID
Is it recommended strategy to manually set a router-id for
each ospf particpating router on the lab, or let
the highest ip decide?
TIA
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:28 GMT-3