From: Jay Chandradas (jachandr@xxxxxxxxx)
Date: Sun Jul 01 2001 - 22:59:33 GMT-3
Thanks Brian,
I had defined it once before. when I removed the isis process and typed
again. It worked
Thanks
Jay.
At 05:56 PM 7/1/2001 -0500, Brian wrote:
>you probably already defined it once before.
>
>no router isis
>no routing clns
>routing clns
>router isis
>net 00.0001.0010.7b3b.378f.00
>
>and watch the typos, if you mess up the net, you have to start over again
>
>
>On Sun, 1 Jul 2001, Jay Chandradas wrote:
>
> > Hi all,
> >
> > I know its too silly, but I cant get it to work..
> > when i configure ISIS , I get the following error
> >
> > R1#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> > R1(config)#router isis
> > R1(config-router)#net 00.0001.0010.7b3b.378f.00
> > %CLNS: System ID (0100.107B.3B37.00) must not change when defining
> > additional area addresses
> >
> >
> > 0010.7b3b.378f os the MAC address of the router Ethernet.
> >
> > Any idea , why I am running into this error.
> >
> > Thanks in advance.
> >
> >
> > Jay.
> > **Please read:http://www.groupstudy.com/list/posting.html
>-----------------------------------------------
> I'm buying / selling used CISCO gear!!
> email me for a quote
>
>Brian Feeny,CCDP,CCNP+VAS Scarlett Parria
>signal@netjam.net scarlett@netjam.net
>318-213-4709 318-213-4701
>
>Netjam, LLC http://www.netjam.net
>333 Texas St. VISA/MC/AMEX/COD
>Suite 1401 30 day warranty
>Shreveport, LA 71101 Cisco Channel Partner
>toll free: 866-2NETJAM
>phone: 318-212-0245
>fax: 318-212-0246
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:28 GMT-3