when configuring ISIS

From: Jay Chandradas (jachandr@xxxxxxxxx)
Date: Sun Jul 01 2001 - 18:03:55 GMT-3

• Next message: Pickell, Aaryn: "RE: Bridging Principle"
• Previous message: Mas Kato: "RE: OSPF Concept Question"
• Next in thread: Brian: "Re: when configuring ISIS"
• Maybe reply: Brian: "Re: when configuring ISIS"
• Maybe reply: Jay Chandradas: "Re: when configuring ISIS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi all,

I know its too silly, but I cant get it to work..
when i configure ISIS , I get the following error

R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router isis
R1(config-router)#net 00.0001.0010.7b3b.378f.00
%CLNS: System ID (0100.107B.3B37.00) must not change when defining
additional area addresses

0010.7b3b.378f os the MAC address of the router Ethernet.

Any idea , why I am running into this error.

Thanks in advance.

Jay.
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Pickell, Aaryn: "RE: Bridging Principle"
• Previous message: Mas Kato: "RE: OSPF Concept Question"
• Next in thread: Brian: "Re: when configuring ISIS"
• Maybe reply: Brian: "Re: when configuring ISIS"
• Maybe reply: Jay Chandradas: "Re: when configuring ISIS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:28 GMT-3