From: Luke (luke.mendoza@xxxxxxxx)
Date: Sun Jun 17 2001 - 21:23:59 GMT-3
I have a couple of quick questions on the 3900 Token Ring Switch:
1. Is there a way to change or modify the duplex settings of the token ring
port either in the switch itself or interface of the router? I have
searched the docs and I don't see it right now. When I do a "show interface
to0" on the router connected to the switch is says "16 mbps, half-duplex".
I'm curious if there is a full duplex and whether someone can configure a
duplex mismatch between the 3900 and a token Ring interface on the router.
2. on the trbrf of my vlan (say vlan100) I assigned an ip address of
172.16.100.254 /24 with a gateway of 172.16.100.1. I tried pinging from the
switch to 172.16.100.1 and its says interface down.... However the switch
can ping itself.. any thoughts?
Thanks in advance!
Luke
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:25 GMT-3