RE: Routing protocols over Async

From: Jubil Mathew (jmathew@xxxxxxxxx)
Date: Thu Jun 14 2001 - 21:40:09 GMT-3

• Next message: Jeff K.: "Re: Routing protocols over Async"
• Previous message: Darren Hosking: "NAT on a stick - possible?"
• Maybe in reply to: Padhu (LFG): "Routing protocols over Async"
• Next in thread: Jeff K.: "Re: Routing protocols over Async"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,

I am not able to get to the interface async 1 part configured.
Is this supported in all IOS images. I am getting the following errors.

3620-2#conf t
3620-2(config)#line aux 0
3620-2(config-line)# modem InOut
3620-2(config-line)# transport input all
3620-2(config-line)# rxspeed 38400
         Failed to change line 65's speed
3620-2(config-line)# txspeed 38400
         Failed to change line 65's speed
3620-2(config-line)# flowcontrol hardware
3620-2(config-line)#

3620-2(config)#int as?
Async

3620-2(config)#int async ?
   <1-65> Async interface number

3620-2(config)#int async 1 ?
% Unrecognized command
3620-2(config)#int async 1

what is to be done next. Is this the proper way to configure aux ports.

regards
Jubil Mathew
Software Engineer, MPSBU
Cisco Systems Inc.
821, Alder drive, SJ-22/2/1
Milpitas, California. 95035
Phone: (408) 853-4566
jmathew@cisco.com
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Jeff K.: "Re: Routing protocols over Async"
• Previous message: Darren Hosking: "NAT on a stick - possible?"
• Maybe in reply to: Padhu (LFG): "Routing protocols over Async"
• Next in thread: Jeff K.: "Re: Routing protocols over Async"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:24 GMT-3