From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Tue Jun 12 2001 - 17:40:53 GMT-3
If you assign an IP address to the tunnel interface, you can ping the
opposite end - any multicasts will reach the opposite end as well...
Regards,
Justin Menga CCIE #6640 CCNP+Voice+ATM CCDP MCSE+I CCSE
Network and Security Consultant
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain information
that is confidential and subject to privilege. If you are not the intended
recipient, you are notified that any use, dissemination, distribution or
copying of this message or data is prohibited. If you have received this
e-mail in error, please notify me immediately and delete all material
pertaining to this e-mail. Thank you.
-----Original Message-----
From: Rick Foltz [mailto:ccie2b@rfoltz.com]
Sent: Wednesday, 13 June 2001 9:05 a.m.
To: ccielab@groupstudy.com
Subject: ospf over tunnels
ok, this is my day for questions, lol. But i know i have read on here that
you cant ping opposit ends of aq tunnel, with extended ping anyways. i have
tried this and its true, and the tunnels pass traffic for other networks
correctly. but if they cant send packets directly to each other, how would
one run ospf over them? any ideas?
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:23 GMT-3