From: Troy Edington (TEdington@xxxxxxxxxxxxx)
Date: Mon Jun 11 2001 - 15:39:04 GMT-3
I had a similar problem, It was some bad memory in the PIX, I would start
there. If you have a Fluke, you can also see what is being spit out on
L1/L2 out of the NIC interfaces.
Cheers
Troy Edington, CCIE #7190
Sr. Network Engineer
Ingenuity Systems Inc
Alviso, CA
-----Original Message-----
From: jhuston [mailto:jhuston@Paracom.com]
Sent: Monday, June 11, 2001 9:13 AM
To: ccielab@groupstudy.com
Subject: RE: PIX 506 Hanging
Yes, I had to buy a Smartnet contract to get it fixed.
> -----Original Message-----
> From: Tracy Blackmore [mailto:TracyB@TSLAD.com]
> Sent: Monday, June 11, 2001 11:02 AM
> To: 'ccielab@groupstudy.com'
> Subject: OT: PIX 506 Hanging
>
>
> Sorry for the off topic but... I have a PIX 506 that I have
> been using in
> my lab and I can't keep it running. It gives no error messages
> what-so-ever. After running for anywhere from ten minutes to
> several hours,
> it locks up and all of the lights (Link, Activity) for both
> ports light up
> and all communication (even to the console) stops.
> I attempted to upgrade the IOS (per CCO) and that didn't
> help. I started at
> 5.2(3) and went to 6.0(1) and it is still occuring. Has
> anybody else seen
> this problem?
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:22 GMT-3