From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Mon Jun 11 2001 - 19:59:29 GMT-3
I have one at home at the moment and it works fine on 6.01, so most likely
hardware related....
Regards,
Justin Menga CCIE #6640 CCNP+Voice+ATM CCDP MCSE+I CCSE
Network and Security Consultant
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain information
that is confidential and subject to privilege. If you are not the intended
recipient, you are notified that any use, dissemination, distribution or
copying of this message or data is prohibited. If you have received this
e-mail in error, please notify me immediately and delete all material
pertaining to this e-mail. Thank you.
-----Original Message-----
From: Tracy Blackmore [mailto:TracyB@TSLAD.com]
Sent: Tuesday, 12 June 2001 4:02 a.m.
To: 'ccielab@groupstudy.com'
Subject: OT: PIX 506 Hanging
Sorry for the off topic but... I have a PIX 506 that I have been using in
my lab and I can't keep it running. It gives no error messages
what-so-ever. After running for anywhere from ten minutes to several hours,
it locks up and all of the lights (Link, Activity) for both ports light up
and all communication (even to the console) stops.
I attempted to upgrade the IOS (per CCO) and that didn't help. I started at
5.2(3) and went to 6.0(1) and it is still occuring. Has anybody else seen
this problem?
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:22 GMT-3