From: Malik Annur (mannur@xxxxxxxxxx)
Date: Mon Jun 11 2001 - 11:17:09 GMT-3
I performed a debug isdn q931 and debug dialer to see my ppp callback in
action. The debug dialer shows "Callback negotiated - waiting for server to
disconnect". The debug isdn q931 doesn't show a call setup from the callback
server. Was the callback successful? The output is below.
19:51:09: BRI0 DDR: Dialing cause ip (s=172.16.35.1, d=172.16.35.2)
19:51:09: BRI0 DDR: Attempting to dial 8358662
19:51:09: ISDN BR0: TX -> SETUP pd = 8 callref = 0x16
19:51:09: Bearer Capability i = 0x8890
19:51:09: Channel ID i = 0x83
19:51:09: Keypad Facility i = '8358662'
19:51:10: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x96
19:51:10: Channel ID i = 0x89
19:51:10: Locking Shift to Codeset 5
19:51:10: Codeset 5 IE 0x2A i = 0x809402, '`=', 0x8307, '8358662',
0x8E
0B20, 'TELTONE', 0x20, '2', 0x20
19:51:10: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x96
19:51:10: ISDN BR0: TX -> CONNECT_ACK pd = 8 callref = 0x16
19:51:10: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
19:51:10: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
19:51:10: isdn_call_connect: Calling lineaction of BRI0:1
19:51:10: BRI0:1 DDR: Authenticated host router5 with no matching dialer map
19:51:10: BRI0:1 DDR: Callback negotiated - waiting for server disconnect
19:51:10: BR0:1 DDR: Dialer protocol up
19:51:10: BRI0:1 DDR: dialer protocol up
19:51:10: BRI0: dialer_ckt_swt_client_connect: incoming circuit switched
call
19:51:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state
to up
r3#
19:51:16: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
router5
[GroupStudy.com removed an attachment of type application/ms-tnef which had a n
ame of winmail.dat]
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:22 GMT-3