From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sun Jun 10 2001 - 16:03:50 GMT-3
it's simplier than that. If you have /24 OSPF route in your routing table,
you can't "summarize" it (that term looses it's meaning actually) down to
/25 using area-range
And, by the way, I'm sorry I made a mistake. summary-address can't be used
for OSPF->IGP summarization at all. Sorry
>From: "michale_lee50@hotmail.com" <michael_lee50@hotmail.com>
>To: "Roman Rodichev" <rodic000@hotmail.com>, <padhu@steinroe.com>,
><ccielab@groupstudy.com>
>Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
>Redistributi on problem
>Date: Sun, 10 Jun 2001 13:45:10 -0500
>
>scenario. I just need a way to inject the ospf /25 thro /30 as /28 into
>IGRP...?? This is your question
>
>I have to say that is a strange one. Maybe I'm geting a little too old but
>I
>am under the impression that you want to redistribute a /28 into IGRP ?
>mayby you want to redistribute an ospf network that is directly connected
>into IGRP but that network is not downstrean so you can's use area-range
>and
>it's not coming into ospf so you can's use summary addres?
>
>is this the case?
>
>Mr.Lee
>
>----- Original Message -----
>From: "Roman Rodichev" <rodic000@hotmail.com>
>To: <michael_lee50@hotmail.com>; <padhu@steinroe.com>;
><ccielab@groupstudy.com>
>Sent: Sunday, June 10, 2001 1:02 PM
>Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
>Redistributi on problem
>
>
> > Mr.Lee, you can't use summary-address and area range commands to go from
> > shorter to longer bit mask.
> >
> > >From: "michale_lee50@hotmail.com" <michael_lee50@hotmail.com>
> > >To: "Roman Rodichev" <rodic000@hotmail.com>, <padhu@steinroe.com>,
> > ><ccielab@groupstudy.com>
> > >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > >Redistributi on problem
> > >Date: Sun, 10 Jun 2001 12:56:20 -0500
> > >
> > >Guess I'm sort of late on this but I have to say that Policy routing is
> > >certainly NOT the only way, you can accomplish this with the
> > >summary-address
> > >or the area-range in a given situation.
> > >
> > >Just hit the link and understand where and when to apply each command.
> > >
> > >Mr.Lee
> > >----- Original Message -----
> > >From: "Roman Rodichev" <rodic000@hotmail.com>
> > >To: <padhu@steinroe.com>; <ccielab@groupstudy.com>
> > >Sent: Friday, June 08, 2001 10:58 PM
> > >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > >Redistributi on problem
> > >
> > >
> > > > you are wasting your time, policy routing is the only solution
> > > >
> > > > >From: "Padhu (LFG)" <padhu@steinroe.com>
> > > > >Reply-To: "Padhu (LFG)" <padhu@steinroe.com>
> > > > >To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> > > > >Subject: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > >Redistributi
> > > > >on problem
> > > > >Date: Thu, 7 Jun 2001 21:49:24 -0500
> > > > >
> > > > >I know we have beaten the crap out of VLSM / FLSM scenario. Its
>working
> > > > >fine
> > > > >with IGRP /24 and ospf having longer masks ...( with area ranges
>and
> > > > >summary
> > > > >addresses blah blah etc) ..
> > > > >
> > > > >Now the reverse ...I know i can plug in the ip default network for
>this
> > >and
> > > > >will work. However i am wondering if anyone on the list has got
>this
> > > > >working
> > > > >without ip default network for this scenario. Summary-address and
>area
> > > > >ranges are so out of whack here i can't get this straight in this
> > >reverse
> > > > >scenario. I just need a way to inject the ospf /25 thro /30 as /28
>into
> > > > >IGRP...
> > > > >
> > > > >No Statics ofcourse.
> > > > >
> > > > >Appreciate any help. My ASBR is running 12.0(14).
> > > > >
> > > > >Or you can simply tell me i am wasting time to do the impossible
>...(
> > > > >Ofcourse i can't tell the proctor that)
> > > > >
> > > > >Cheers,Padhu
> > > > >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3