No Interface S0.123

From: Rajeev Siddappa (raj_lab@xxxxxxxxx)
Date: Sun Jun 10 2001 - 01:36:40 GMT-3

• Next message: Rajeev Siddappa: "Term Server"
• Previous message: cao lingwei: "Re: mpls lab equipments"
• Next in thread: Himawan Nugroho: "Re: No Interface S0.123"
• Maybe reply: Himawan Nugroho: "Re: No Interface S0.123"
• Maybe reply: Andrew: "Re: No Interface S0.123"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi evry one,

when u remove a subinterface, normally this message
appears. what does it mean.

Termserver(config)#no interface s0.123

% Not all config may be removed and may reappear after
reactivating the sub-interface

Termserver(config)#

1. It menas that if I rebulit the subinteface all the
configs will be there on teh subinterafce?
 -But it did not happen when I tried.

2. But when u type

Termserver#sh ip interface brief

Interface IP-Address OK? Method
Status Protocol
Loopback0 2.2.2.2 YES NVRAM up
                 up
Serial0 unassigned YES unset up
                 up
Serial0.123 unassigned YES NVRAM
deleted down
Serial1 unassigned YES unset
administratively down down
TokenRing0 unassigned YES unset
administratively down down
Termserver#

U can see that the interafce has been shown as deleted

but how to clear it from the table.
Is reboot only method for clearing this or any
command.

2. Some one posted a meaage regarding this long back.
  I think that was Chuck Lourie. Can u pls repeat the
same. sorry to asking. I could not get it in the
archives.

Thank you,
Rajeev.

• Next message: Rajeev Siddappa: "Term Server"
• Previous message: cao lingwei: "Re: mpls lab equipments"
• Next in thread: Himawan Nugroho: "Re: No Interface S0.123"
• Maybe reply: Himawan Nugroho: "Re: No Interface S0.123"
• Maybe reply: Andrew: "Re: No Interface S0.123"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3