From: solsun130 (solesun130@xxxxxxxxx)
Date: Sat Jun 09 2001 - 07:23:36 GMT-3
hi,
i don't know what lab 17 is but....
if the border is the hub(R4) and r3 & r8 are the spokes in the same group:
with dlsw connection without circuits active:
r3#sh dlsw peers
Peers: state pkts_rx pkts_tx type drops ckts TCP uptime
TCP 1.1.1.1(r4) CONNECT 2 3 conf 0 0 0 00:00:08
with dlsw connection & circuits active:
r3#sh dlsw peers
Peers: state pkts_rx pkts_tx type drops ckts TCP uptime
TCP 1.1.1.1(r4) CONNECT 25 33 conf 0 0 0 00:11:08
TCP 2.2.2.2(r8) CONNECT 8 10 pod 0 1 0 00:01:10
hope this helps
----- Original Message -----
From: "Dean, Justin" <Justin.Dean@nrtinc.com>
To: <ccielab@groupstudy.com>
Sent: Friday, June 08, 2001 12:40 AM
Subject: dlsw on lab 17
> Quick DLSW question. It says to only use 4 remote peer statements and have
2
> peers each.
>
> I set up R4 as border:
> dlsw local-peer peer-id 15.15.4.4 group 1 border
>
> then put in a remote peer statement to R3 and to R8. I put r3 and r8 in
> group 1 and promiscous with 1 remote peer to r4. It says each router
should
> have 2 peers, but I only see r4 as a peer on both R3 and R8. Does anyone
> know if I am missing something or does there need to be certain traffic to
> initiate the peer. thanks, justin
> **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3