From: Masood Malik (malikm24@xxxxxxxxxxx)
Date: Thu Jun 07 2001 - 18:24:43 GMT-3
Hi,
on server side (R5)
replace the usename line with
username R5 password 0 cisco
and add in interface dialer 1
ppp callback accept
and on R3 interface dialer 1 add
ppp callback request
This will work
regards
Masood
----- Original Message -----
From: "Russell Lusignan" <rlusignan@birdonawire.com>
To: "'Nicholas Jaksec'" <jaksec@lucent.com>; "CCIE" <ccielab@groupstudy.com>
Sent: Friday, June 08, 2001 3:26 AM
Subject: RE: ISDN callback with dialer profiles
> I believe the ppp callback request/accept statements should be on the
Dialer
> interface, not the BRI interface (correct me if I am wrong group). Also,
> place ppp auth chap statement on the Dialer interface. Don't know if this
> will make any difference, unfortunately I don't have an ISDN sim/line to
> test this.
>
> -Russ
>
> > -----Original Message-----
> > From: Nicholas Jaksec [mailto:jaksec@lucent.com]
> > Sent: Thursday, June 07, 2001 12:26 PM
> > To: CCIE
> > Subject: ISDN callback with dialer profiles
> >
> >
> > I am having a problem trying to get callback to work with
> > dialer profiles.
> > If I use Legacy DDR (just the bri0 interface) I hav no
> > problem whatsoever.
> > Below are my configs, any response would be appreciated:
> >
> > R5:
> >
> > hostname R5
> > !
> > !
> > username R3 password 7 14141B180F0B
> > no ip domain-lookup
> > isdn switch-type basic-5ess
> > !
> > interface Loopback0
> > ip address 55.2.2.1 255.255.255.0
> > !
> > interface Loopback1
> > ip address 55.3.3.1 255.255.0.0
> > !
> > interface Ethernet0
> > ip address 172.168.60.1 255.255.255.0
> > !
> > interface Serial0
> > ip address 55.1.1.1 255.255.255.0
> > encapsulation frame-relay
> > ip split-horizon
> > ip ospf network broadcast
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface Serial2
> > no ip address
> > shutdown
> > !
> > interface Serial3
> > no ip address
> > shutdown
> > !
> > interface BRI0
> > no ip address
> > encapsulation ppp
> > isdn spid1 3848500001
> > no peer neighbor-route
> > no peer default ip address
> > no peer default ip address
> > dialer pool-member 1
> > ppp callback request
> > ppp authentication chap
> > !
> > interface Dialer1
> > ip address 172.168.65.1 255.255.255.0
> > encapsulation ppp
> > dialer remote-name R3
> > dialer idle-timeout 30
> > dialer string 384830
> > dialer pool 1
> > dialer-group 1
> > ppp authentication chap
> > !
> > router igrp 1
> > passive-interface BRI0
> > passive-interface Dialer1
> > network 55.0.0.0
> > network 172.168.0.0
> > !
> > no ip classless
> > ip route 0.0.0.0 0.0.0.0 BRI0 120
> > ip route 192.168.4.0 255.255.255.0 Null0
> > ip route 192.168.5.0 255.255.255.0 Null0
> > ip route 192.168.6.0 255.255.255.0 Null0
> > !
> > access-list 901 deny any any all any rip
> > access-list 901 deny any any all any sap
> > access-list 901 deny any any all any 457
> > access-list 901 permit any any all any all
> > !
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx list 901
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> >
> >
> >
> > R3:
> >
> > hostname R3
> > !
> > !
> > username R5 callback-dialstring 384850 password 0 cisco
> > ipx routing 0003.0003.0003
> > isdn switch-type basic-5ess
> > !
> > interface Loopback0
> > ip address 55.4.4.1 255.255.255.0
> > ipx network 10
> > !
> > interface Ethernet0
> > ip address 137.20.20.10 255.255.255.0
> > no keepalive
> > ipx network 40
> > !
> > interface Serial0
> > ip address 55.1.1.2 255.255.255.0
> > encapsulation frame-relay
> > ip ospf network broadcast
> > ip ospf priority 200
> > ipx network 20
> > no fair-queue
> > frame-relay lmi-type cisco
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface BRI0
> > no ip address
> > encapsulation ppp
> > isdn spid1 3848300001
> > no peer neighbor-route
> > dialer pool-member 1
> > no cdp enable
> > ppp callback accept
> > ppp authentication chap
> > !
> > interface Dialer1
> > ip address 172.168.65.2 255.255.255.0
> > encapsulation ppp
> > dialer remote-name R5
> > dialer callback-secure
> > dialer idle-timeout 30
> > dialer string 384850 class callback
> > dialer max-call 250
> > dialer pool 1
> > dialer-group 1
> > ppp authentication chap
> > !
> > router igrp 1
> > passive-interface BRI0
> > passive-interface Dialer1
> > network 55.0.0.0
> > network 172.168.0.0
> > !
> > no ip classless
> > !
> > map-class dialer callback
> > dialer callback-server username
> > access-list 901 deny any any all any rip
> > access-list 901 deny any any all any sap
> > access-list 901 deny any any all any 457
> > access-list 901 permit any any all any all
> > !
> > !
> > !
> > ipx sap 4 Novell 40.0001.0002.0003 451 2
> > !
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx list 901
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> >
> >
> >
> >
> > ********************************************
> > Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
> > Network Systems Engineer
> > Lucent Worldwide Services
> > One North Shore Center
> > 12 Federal St. Suite 420
> > Pittsburgh, Pa 15212
> > Office: 412-330-6336 Fax: 412-323-7665
> > Pager: 1-800-467-1467
> > Email: jaksec@lucent.com
> > ********************************************
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:20 GMT-3