From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Fri Jun 08 2001 - 04:20:35 GMT-3
It is "safer" to do all ppp configuration parameters on the physical
interface. The only thing that you need on the dialer interface is 'encap
ppp'. The other suggestions were right now. You need to do a 'callback
request' and 'callback accept' on the calling and called router
respectively.
Daniel C. Young
Sr. Network Engineer
CCNP (ATM, Security & Voice Specialist),
CCDP, CCSE, MCSE+I
SBC Internet Data Center
(949) 221-1928 Work
(714) 350-8945 Cell
young@pobox.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Russell Lusignan
Sent: Thursday, June 07, 2001 10:27 AM
To: 'Nicholas Jaksec'; CCIE
Subject: RE: ISDN callback with dialer profiles
I believe the ppp callback request/accept statements should be on the Dialer
interface, not the BRI interface (correct me if I am wrong group). Also,
place ppp auth chap statement on the Dialer interface. Don't know if this
will make any difference, unfortunately I don't have an ISDN sim/line to
test this.
-Russ
> -----Original Message-----
> From: Nicholas Jaksec [mailto:jaksec@lucent.com]
> Sent: Thursday, June 07, 2001 12:26 PM
> To: CCIE
> Subject: ISDN callback with dialer profiles
>
>
> I am having a problem trying to get callback to work with
> dialer profiles.
> If I use Legacy DDR (just the bri0 interface) I hav no
> problem whatsoever.
> Below are my configs, any response would be appreciated:
>
> R5:
>
> hostname R5
> !
> !
> username R3 password 7 14141B180F0B
> no ip domain-lookup
> isdn switch-type basic-5ess
> !
> interface Loopback0
> ip address 55.2.2.1 255.255.255.0
> !
> interface Loopback1
> ip address 55.3.3.1 255.255.0.0
> !
> interface Ethernet0
> ip address 172.168.60.1 255.255.255.0
> !
> interface Serial0
> ip address 55.1.1.1 255.255.255.0
> encapsulation frame-relay
> ip split-horizon
> ip ospf network broadcast
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface Serial2
> no ip address
> shutdown
> !
> interface Serial3
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> encapsulation ppp
> isdn spid1 3848500001
> no peer neighbor-route
> no peer default ip address
> no peer default ip address
> dialer pool-member 1
> ppp callback request
> ppp authentication chap
> !
> interface Dialer1
> ip address 172.168.65.1 255.255.255.0
> encapsulation ppp
> dialer remote-name R3
> dialer idle-timeout 30
> dialer string 384830
> dialer pool 1
> dialer-group 1
> ppp authentication chap
> !
> router igrp 1
> passive-interface BRI0
> passive-interface Dialer1
> network 55.0.0.0
> network 172.168.0.0
> !
> no ip classless
> ip route 0.0.0.0 0.0.0.0 BRI0 120
> ip route 192.168.4.0 255.255.255.0 Null0
> ip route 192.168.5.0 255.255.255.0 Null0
> ip route 192.168.6.0 255.255.255.0 Null0
> !
> access-list 901 deny any any all any rip
> access-list 901 deny any any all any sap
> access-list 901 deny any any all any 457
> access-list 901 permit any any all any all
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx list 901
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
>
> R3:
>
> hostname R3
> !
> !
> username R5 callback-dialstring 384850 password 0 cisco
> ipx routing 0003.0003.0003
> isdn switch-type basic-5ess
> !
> interface Loopback0
> ip address 55.4.4.1 255.255.255.0
> ipx network 10
> !
> interface Ethernet0
> ip address 137.20.20.10 255.255.255.0
> no keepalive
> ipx network 40
> !
> interface Serial0
> ip address 55.1.1.2 255.255.255.0
> encapsulation frame-relay
> ip ospf network broadcast
> ip ospf priority 200
> ipx network 20
> no fair-queue
> frame-relay lmi-type cisco
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> encapsulation ppp
> isdn spid1 3848300001
> no peer neighbor-route
> dialer pool-member 1
> no cdp enable
> ppp callback accept
> ppp authentication chap
> !
> interface Dialer1
> ip address 172.168.65.2 255.255.255.0
> encapsulation ppp
> dialer remote-name R5
> dialer callback-secure
> dialer idle-timeout 30
> dialer string 384850 class callback
> dialer max-call 250
> dialer pool 1
> dialer-group 1
> ppp authentication chap
> !
> router igrp 1
> passive-interface BRI0
> passive-interface Dialer1
> network 55.0.0.0
> network 172.168.0.0
> !
> no ip classless
> !
> map-class dialer callback
> dialer callback-server username
> access-list 901 deny any any all any rip
> access-list 901 deny any any all any sap
> access-list 901 deny any any all any 457
> access-list 901 permit any any all any all
> !
> !
> !
> ipx sap 4 Novell 40.0001.0002.0003 451 2
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx list 901
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
>
>
> ********************************************
> Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
> Network Systems Engineer
> Lucent Worldwide Services
> One North Shore Center
> 12 Federal St. Suite 420
> Pittsburgh, Pa 15212
> Office: 412-330-6336 Fax: 412-323-7665
> Pager: 1-800-467-1467
> Email: jaksec@lucent.com
> ********************************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:20 GMT-3