From: rsevier (rsevier@xxxxxxxxxxxxxxxxxxx)
Date: Wed Jun 06 2001 - 15:09:37 GMT-3
M - Could you pls elaborate on this.
Raymond
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Mas
Kato
Sent: Wednesday, June 06, 2001 1:23 AM
To: 'Daniel C. Young'; ccielab@groupstudy.com
Subject: RE: How to sample bandwidth every 0.125 seconds (fatkid 441)
Hint: It's derived from how fast the interface is being clocked (which
determines how fast a given queue can empty), your byte-counts and the
number of queues to be serviced per cycle. The archives contain some
examples and generic formulae.
Regards,
Mas
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Daniel C. Young
Sent: Wednesday, June 06, 2001 12:24 AM
To: ccielab@groupstudy.com
Subject: How to sample bandwidth every 0.125 seconds (fatkid 441)
Group,
Item 8 on Fatkid 441 asks to: "Configure prioritization between routers
R5
and R1 such that SNA traffic gets at least 50 percent of the available
bandwidth sampled every 0.125 seconds"
How does one sample this bandwidth every 0.125 seconds? Is this just the
default.
Thank you in advance,
Daniel C. Young
Sr. Network Engineer
CCNP (ATM, Security & Voice Specialist),
CCDP, CCSE, MCSE+I
SBC Internet Data Center
(949) 221-1928 Work
(714) 350-8945 Cell
young@pobox.com
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3