From: garry baker (fallow46@xxxxxxxxx)
Date: Wed Jun 06 2001 - 03:50:13 GMT-3
Guys,
I am trying to understand the above command but it
isn't doing what i expected. in the cisco doco it says
to use on the nssa abr when you want the redistribute
command to import routes into the normal areas and not
the nssa. i read that as redistribute the route and
the no-redistribute command will make it appear in
areas other than the nssa.
i have three routers connected:
no 1 is the nssa abr into area 0
no 2 is an nssa router between routers 1 and 3
n0 3 is the nssa asbr running rip.
my reading of the doco tells me that if i redistribute
the rip at the nssa asbr i will see the rip route as
an N route in the nssa and an E route in area 0, this
is happening. know if i were to attach the
no-redistribution command at the abr i read the doco
as i shouldn't see the N route in the nssa, just the E
route in the backbone. am i reading this correctly?
When i do this there is no change to the redistributed
rip route in either the nssa or area 0. i tried using
the no-redsitribution command at the asbr and it is
true to form, it does not redistribute the rip route
in the nssa but nor do i see it in area 0!
Can somebody explain to me what the doco really means
as i cannot get this sucker to achieve what i read as
it is supposed to?
Garry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3