From: Rodgers Moore (rodgers@xxxxxxxxxxxxxx)
Date: Wed Jun 06 2001 - 00:16:05 GMT-3
This looks right to me and CCO says it is too. You're right I can't find a way
to
verify it either. You'd think show int or show ip int would show that it is
configured. Custom queueing doesn't show if the map class is applied to the
physical interface either, it won't until you apply the custom queue list direc
ty
to the interface by using "show int". The only way to apply a custom queue to
a
sub interface is via the map class. So, I think this is one of those cases whe
re
faith is the only command that works. Also, supposedly whatever queueing is
applied to the physical interface is inhereited by the sub interfaces.
Rodgers Moore
"michale_lee50@hotmail.com" wrote:
> Hi All,
> I'm trying to apply a queue-list to a sub interface, i tried to use the class
> command to bind it to the interface but I'm not able to verify with any show
> command that is on the sub interface.
>
> map-class frame-relay car
> no frame-relay adaptive-shaping
> frame-relay custom-queue-list 1
> !
> interface Serial0/0.526 multipoint
> ip address 144.1.9.7 255.255.255.192
> frame-relay class car
>
> Will the custom-queue-list work on a physical interface and represent a sub
> interface ?
>
> Thanks,
> Mr.Lee
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3