From: MARIOLIS@xxxxxxxxxxxxx
Date: Wed Jun 06 2001 - 22:50:48 GMT-3
try show priority int s0/0.x
mike
----- Original Message -----
From: Rodgers Moore <rodgers@the-moores.org>
To: michale_lee50@hotmail.com <michael_lee50@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, June 05, 2001 11:16 PM
Subject: Re: CAR
> This looks right to me and CCO says it is too. You're right I can't find a
way to
> verify it either. You'd think show int or show ip int would show that it
is
> configured. Custom queueing doesn't show if the map class is applied to
the
> physical interface either, it won't until you apply the custom queue list
directy
> to the interface by using "show int". The only way to apply a custom
queue to a
> sub interface is via the map class. So, I think this is one of those
cases where
> faith is the only command that works. Also, supposedly whatever queueing
is
> applied to the physical interface is inhereited by the sub interfaces.
>
> Rodgers Moore
>
> "michale_lee50@hotmail.com" wrote:
>
> > Hi All,
> > I'm trying to apply a queue-list to a sub interface, i tried to use the
class
> > command to bind it to the interface but I'm not able to verify with any
show
> > command that is on the sub interface.
> >
> > map-class frame-relay car
> > no frame-relay adaptive-shaping
> > frame-relay custom-queue-list 1
> > !
> > interface Serial0/0.526 multipoint
> > ip address 144.1.9.7 255.255.255.192
> > frame-relay class car
> >
> > Will the custom-queue-list work on a physical interface and represent a
sub
> > interface ?
> >
> > Thanks,
> > Mr.Lee
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3