From: Mas Kato (tealp729@xxxxxxxx)
Date: Tue Jun 05 2001 - 12:35:57 GMT-3
Try lowering the 'dialer enable-timeout' values. Although sometimes it
seems to make BOD wig-out...
Mas
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
chahal
Sent: Tuesday, June 05, 2001 7:59 AM
To: ccielab@groupstudy.com
Subject: ISDN Callback Server
When configuring ISDN in a callback server scenanrio there is a
significant
delay before the callback completes. For example if I issue a standard
ping
to the ip address of the other end of the ISDN circuit, the five pings
that
are sent timeout and then the bri comes up and I am able to subsequently
ping. If I issue just one ping there's a delay of 4-5 seconds before the
callback request is completed.
Is this normal? Are there was to tune this. I'm also using chap
authentication and one end is legacy the other dialer profiles. In any
variation like this the results are the same. Configs are below.
Thanks
Bob
R5
interface BRI1/0
ip address 172.16.11.5 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer map ip 172.16.11.6 name r6 broadcast 2009
dialer-group 1
isdn switch-type basic-net3
ppp callback request
ppp authentication chap callin
!
R6
interface BRI1/0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap
!
Dialer0
interface Dialer0
ip address 172.16.11.6 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer remote-name r5
dialer pool 1
dialer string 2001 class bob
dialer hold-queue 75
dialer-group 1
ppp callback accept
ppp authentication chap
!
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3