From: Bob Dixon (bobdixon@xxxxxxxxxxxx)
Date: Tue Jun 05 2001 - 01:49:41 GMT-3
All,
Based on recent suggestions for a baseline IOS image to run in a CCIE study
lab, I am in the process of upgrading mine to 12.0.14. However, on a 2502, I
am getting the following:
Router(boot)#copy tftp flash
Flash address space cannot be written to.
Memory type is Flash. Chips are not identifiable.
The router runs fine on its current image. See below:
Router(boot)#sh flash
8192K bytes of Flash address space sized on CPU board.
Memory type is Flash.
File name/status
0 c2500-ds-l.113-11a.bin
What am I missing here?
Thanks,
Bob
PS Here is the sh ver as well.
Router(boot)#sh ver
3000 Software (IGS-RXBOOT Bootstrap), Version 9.14(6)[fc2], RELEASE SOFTWARE
Patchlevel = 9.1(10)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Thu 07-Apr-94 13:58 by chansen
System Bootstrap, Version 4.14(6)[fc3], SOFTWARE
Router uptime is 15 minutes
System restarted by reload
Running default software
cisco 2500 (68030) processor (revision B) with 16384K/2048K bytes of memory.
Processor board serial number 01197477
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
Desktop software set supported. (0x1)
1 Token Ring/IEEE 802.5 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of Flash address space sized on CPU board.
Configuration register is 0x2101
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3