From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Mon Jun 04 2001 - 23:13:48 GMT-3
the thing to remember that icanreach mask works just like mask in ip route
statement, not like in access-list wildcard mask
so the solution is correct
>From: "Choon, Raymond ()" <rchoon@att.com>
>Reply-To: "Choon, Raymond ()" <rchoon@att.com>
>To: "'CCIE Cisco'" <c_ccie@hotmail.com>, ccielab@groupstudy.com
>Subject: ccbootcamp--lab 19
>Date: Mon, 4 Jun 2001 21:44:33 -0400
>
>I have a question about the answer in lab 19, section three, task two, #3
>in
>Advanced DLSW configuration
>
>The question asks not to send the MAC address 3003.3003.xxxx.
>
>The answer from ccbootcamp is:
>
> dlsw icanreach mac-address 3003.3003.0000 mask ffff.ffff.0000
>
>I would think the answer should be:
>
> dlsw icanreach mac-address 3003.3003.0000 mask 0000.0000.ffff
>
>
>Any comments??
>
>Raymond Choon
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3