From: Mike Schlenger (mschlenger@xxxxxxxxxxxxxxxx)
Date: Mon Jun 04 2001 - 15:15:50 GMT-3
On your dial peer statements, try prefixing your access code if you are
behind a PBX. (The router will assume the "9" is an access code and strip
it) Do a debug voice ccapi all to determine what you are sending out.
e.g.
dial-peer voice 1 pots
destination-pattern 9.......
prefix 9
port 1/0/0
Mike
Mike Schlenger
CCIE #7079
-----Original Message-----
From: sanjay [mailto:ccienxtyear@hotmail.com]
Sent: Monday, June 04, 2001 1:05 PM
To: ccielab@groupstudy.com
Subject: FXO Port configuration question
Hi,
I am not able to dial out to the PSTN with a anlog line in the FXO port.
Below
is part of a config from a router that has FXS and FXO ports. I have the FXS
port working fine, calling between 2 phones on 2 FXS ports. when I try to
dial
out to the PSTN, it doesn't work. The 'dial-peer voice 201 pots' is the
config
associated with the FXO port. Am I missing something in the config for the
FXO
port. All the ports are in UP state.
thanks,
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-ni
!
voice-port 2/0/0
!
voice-port 2/1/0
!
voice-port 2/0/1
!
voice-port 2/1/1
!
dial-peer voice 401 pots
destination-pattern 5553737
port 2/1/1
!
dial-peer voice 402 pots
destination-pattern 5554141
port 2/1/0
!
dial-peer voice 201 pots
destination-pattern +9...........
port 2/0/1
!
num-exp 3737 5553737
num-exp 4141 5554141
!
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3