From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Mon Jun 04 2001 - 15:34:09 GMT-3
Thanks. I removed the + in front of 9 and added 'prefix 9' to my config. I
am able to dial out now. I am behind a PBX though.
thanks,
Sanjay
----- Original Message -----
From: "Mike Schlenger" <mschlenger@n2nsolutions.com>
To: "'sanjay'" <ccienxtyear@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, June 04, 2001 11:15 AM
Subject: RE: FXO Port configuration question
> On your dial peer statements, try prefixing your access code if you are
> behind a PBX. (The router will assume the "9" is an access code and strip
> it) Do a debug voice ccapi all to determine what you are sending out.
>
> e.g.
> dial-peer voice 1 pots
> destination-pattern 9.......
> prefix 9
> port 1/0/0
>
> Mike
>
> Mike Schlenger
> CCIE #7079
>
> -----Original Message-----
> From: sanjay [mailto:ccienxtyear@hotmail.com]
> Sent: Monday, June 04, 2001 1:05 PM
> To: ccielab@groupstudy.com
> Subject: FXO Port configuration question
>
>
> Hi,
>
> I am not able to dial out to the PSTN with a anlog line in the FXO port.
> Below
> is part of a config from a router that has FXS and FXO ports. I have the
FXS
> port working fine, calling between 2 phones on 2 FXS ports. when I try to
> dial
> out to the PSTN, it doesn't work. The 'dial-peer voice 201 pots' is the
> config
> associated with the FXO port. Am I missing something in the config for the
> FXO
> port. All the ports are in UP state.
>
> thanks,
>
> ip subnet-zero
> no ip domain-lookup
> isdn switch-type basic-ni
> !
> voice-port 2/0/0
> !
> voice-port 2/1/0
> !
> voice-port 2/0/1
> !
> voice-port 2/1/1
> !
> dial-peer voice 401 pots
> destination-pattern 5553737
> port 2/1/1
> !
> dial-peer voice 402 pots
> destination-pattern 5554141
> port 2/1/0
> !
> dial-peer voice 201 pots
> destination-pattern +9...........
> port 2/0/1
> !
> num-exp 3737 5553737
> num-exp 4141 5554141
> !
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3