From: Don Taylor II (dontaylor2@xxxxxxxx)
Date: Tue May 29 2001 - 22:58:49 GMT-3
I recently got a new flash card for my 1604 to upgrade it to 8MB, but I'm
having an impossible time getting an image onto the card. Every time I try
to copy tftp flash I get "%Error: No PCMCIA flash chip information
available." The best idea I can get off CCO is to use the "format flash"
command, which isn't available on my router. Anybody have any ideas? So far
I've tried changing the config-register setting from 0x2102 to 0x2101 to
0x41, etc.; I've also tried "erase flash," which *seems* to work, but upon
"show flash" or "show version" (see below) I still get the error.
All help will be appreciated.
- Don
ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc
1)
Router uptime is 0 minutes
System restarted by reload
System image file is "eprom:c1600-boot-r.111-10.AA", booted via ROM
cisco 1604 (68360) processor (revision C) with 5632K/512K bytes of memory.
Processor board ID 08344957
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
1 ISDN Basic Rate interface.
U interface with external S bus interface for ISDN Basic Rate interface.
Unrecognized interface found (0-1 = Motherboard interfaces 2 = WIC)
Interface 2 unrecognized by boothelper
System/IO memory with parity disabled
8K bytes of non-volatile configuration memory.
%Error: No PCMCIA flash chip information available
Configuration register is 0x41
Router(boot)#
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:56 GMT-3