From: Brian Dennis (brian@xxxxxx)
Date: Wed May 23 2001 - 16:26:47 GMT-3
You can also do unequal cost load balancing with static routes.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
brian@5g.net
(925) 260-2724
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Pickell, Aaryn
Sent: Wednesday, May 23, 2001 11:50 AM
To: 'Shane Miles'; 'ccielab@groupstudy.com'
Subject: RE: OSPF unequal cost load balancing
Only Eigrp and Igrp support unequal cost load balancing. Everything else
will only do equal cost.
Aaryn Pickell - CCNP ATM, CCDP, MCSE
Senior Engineer - Routing Protocols
Getronics Inc.
Direct: 713-394-1609
Email:aaryn.pickell@getronics.com
This e-mail message and any attachments are confidential and may be
privileged. If you are not the intended recipient, please notify me
immediately by replying to this message and please destroy all copies of
this message and attachments. Thank you.
> -----Original Message-----
> From: Shane Miles [mailto:smiles@ftdata.com]
> Sent: Wednesday, May 23, 2001 1:25 PM
> To: 'ccielab@groupstudy.com'
> Subject: OSPF unequal cost load balancing
>
>
> My understanding is that when using OSPF you can have up to 4
> equal-cost paths performing load balancing. Is it at all
> possible to do
> unequal cost load balancing with OSPF as is possible with EIGRP?
>
> --
> Shane P. Miles
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:50 GMT-3