From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Wed May 23 2001 - 16:18:37 GMT-3
I believe you could however manipulate a cost by changing the delay and
bandwidth factors on a particular link could you not?
----- Original Message -----
From: "Pickell, Aaryn" <Aaryn.Pickell@getronics.com>
To: "'Shane Miles'" <smiles@ftdata.com>; <ccielab@groupstudy.com>
Sent: Wednesday, May 23, 2001 11:50 AM
Subject: RE: OSPF unequal cost load balancing
> Only Eigrp and Igrp support unequal cost load balancing. Everything else
> will only do equal cost.
>
> Aaryn Pickell - CCNP ATM, CCDP, MCSE
> Senior Engineer - Routing Protocols
> Getronics Inc.
> Direct: 713-394-1609
> Email:aaryn.pickell@getronics.com
>
> This e-mail message and any attachments are confidential and may be
> privileged. If you are not the intended recipient, please notify me
> immediately by replying to this message and please destroy all copies of
> this message and attachments. Thank you.
>
>
> > -----Original Message-----
> > From: Shane Miles [mailto:smiles@ftdata.com]
> > Sent: Wednesday, May 23, 2001 1:25 PM
> > To: 'ccielab@groupstudy.com'
> > Subject: OSPF unequal cost load balancing
> >
> >
> > My understanding is that when using OSPF you can have up to 4
> > equal-cost paths performing load balancing. Is it at all
> > possible to do
> > unequal cost load balancing with OSPF as is possible with EIGRP?
> >
> > --
> > Shane P. Miles
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:50 GMT-3